Error codes, fixes and maintenance for home hot tubs

Hot Tub Has No Power

Power, GFCI & Controls · Last reviewed 2026-11-21

Quick answer

A hot tub with no lights, no display and no pumps usually has a tripped GFCI or breaker, or a blown fuse in the control box. Check the GFCI disconnect near the tub and the breaker in the house panel. If both are on, the problem may be a fuse on the control board or a wiring fault.

Most likely causes

  1. Tripped GFCI. See Hot Tub GFCI Keeps Tripping.
  2. Tripped house breaker. Separate from the GFCI on some installations.
  3. Blown control board fuse. Many boards have fuses.
  4. Loose connection. At the control box or disconnect.

Step-by-step troubleshooting

  1. Check and reset the GFCI.
  2. Check the house breaker.
  3. With power off, inspect fuses on the control board.
  4. If the display is blank but pumps run, see Hot Tub Topside Panel Not Working.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.