Hot Tub Error Codes
Most home hot tubs are run by a control system from Balboa, Gecko (in.xe, in.ye, MSPA and others) or Hydro-Quip, while some brands like Jacuzzi, Hot Spring and Sundance use their own. The control system, not the hot tub brand, decides what the codes on your topside panel mean.
Many codes look the same across systems (FLO, OH, ICE) but can mean slightly different things, and codes change between generations of the same brand. Use these guides to understand what a code usually points to and what to check, then confirm in the manual or quick reference card for your exact control. If you don't know which system you have, start with Which Hot Tub Control System Do I Have?.
Error codes guides
- Hot Tub FLO Error: What It Means and How to Fix ItA FLO code means the hot tub control isn't detecting enough water flow through the heater. Check filters, water level, air locks and the pressure switch.
- Hot Tub OH, OHH or OHS Overheat ErrorAn OH, OHH, OHS or HH code means your hot tub water or heater got too hot. Common causes, safety steps and how to reset it.
- Hot Tub HL, HFL and LF ErrorsWhat the HL (Gecko high limit) and HFL or LF (Balboa heater flow) codes mean, and how to fix the flow and sensor problems behind them.
- Hot Tub dr or dry Error: Dry Heater DetectedThe dr and dry codes on Balboa hot tubs mean the heater may not have enough water. What to check and how to clear the lockout.
- Hot Tub ICE, IC or FrE Freeze WarningICE, IC or FrE on your hot tub panel means freeze protection is active. What it does, when it's normal, and when to worry.
- Hot Tub Sensor Errors: Sn, SnA, SnB, SnS and PrrWhat hot tub sensor codes mean on Balboa (Sn, SnA, SnB, SnS) and Gecko (Prr) controls, and how to check the sensor and connection.
- Hot Tub Pr Code: Priming Mode on StartupSeeing Pr on your hot tub panel after turning it on? It's priming mode, not a fault. How to prime the pumps and clear air.
- Which Hot Tub Control System Do I Have?How to tell whether your hot tub uses a Balboa, Gecko, Hydro-Quip or proprietary control system, and where to find the part numbers.
- Hot Tub Error Codes ChartA quick-reference chart of common hot tub error codes on Balboa and Gecko systems and what to check first for each.
- Hot Tub Error Code Won't ClearHow to reset a hot tub error code, why some codes come straight back, and when a stuck code means a failing sensor or board.
- Hot Tub Control Panel LockedWhy your hot tub panel won't respond to button presses, how panel and temperature locks work, and how to find the unlock sequence.
- Hot Tub Temperature Reading WrongWhy the hot tub display doesn't match the real water temperature, how to check it, and fixing sensors and readings that lag.
Most codes are about water flow
Heaters need a steady flow of water to run safely. When filters clog, water is low, a valve is closed or there's air in the pump, the control can't confirm flow and shuts the heater down with a flow or temperature code. That's why the first three checks for most codes are the same: water level, filters and air locks.