Pumps, Jets & Air Locks
Most hot tubs have one or more jet pumps, often two-speed on the first pump, which also handles filtering on many tubs. Some have a separate small circulation pump that runs most of the day for heating and filtering. Pumps have two main parts: the motor and the wet end (the plastic housing and impeller), which can usually be replaced separately.
Pump problems tend to show up as noise (humming, grinding, screeching), leaks under the pump, weak jets or flow error codes. Before replacing anything, rule out air locks, clogged filters and closed valves.
Pumps & jets guides
- Hot Tub Pump Not WorkingFix a hot tub pump that won't run: air locks, power and relays, seized motors, capacitors, and choosing a replacement motor or wet end.
- Hot Tub Pump Humming but Not RunningA humming hot tub pump that won't spin usually has seized bearings, a jammed impeller or a failed capacitor. What to check and how to fix it.
- Hot Tub Pump LeakingWater under the pump? Find whether it's the shaft seal, the wet end O-ring, a union or the drain plug, and how each is fixed.
- How to Fix a Hot Tub Air LockClear an air lock after refilling a hot tub: bleeding the pump union, running jets on low and high, and filling through the filter.
- Hot Tub Circulation Pump ProblemsFix a hot tub circulation pump that's noisy, not running or losing flow, and how it affects heating and filtering.
- Hot Tub Jets WeakRestore weak hot tub jets: dirty filters, low water, closed jets or diverters, air controls, air locks and worn pumps.
- Some Hot Tub Jets Not WorkingWhen some hot tub jets work and others don't: closed jets, the diverter, a different pump, clogged jets and broken jet internals.
- How to Replace a Hot Tub JetIdentify and replace a broken or leaking hot tub jet insert or jet body, measure the right size, and avoid common mistakes.
- Noisy Hot Tub PumpWhat grinding, screeching, rattling or humming from a hot tub pump means, and which noises need fixing now.
- Hot Tub Pump Won't Shut OffWhy a hot tub pump runs constantly: normal filter, heating and freeze cycles, versus a stuck relay or faulty control.
- Hot Tub Diverter Valve Stuck or Hard to TurnFree a stiff hot tub diverter valve, and replace the internals or O-rings when it's leaking or broken.
- Hot Tub Air Blower Not WorkingFix a hot tub air blower that won't run, trips the GFCI or only blows weakly, and protect it from water damage.
- Choosing a Replacement Hot Tub PumpHow to match a replacement hot tub pump or motor: horsepower, voltage, speeds, frame size, plumbing size and suction/discharge orientation.
Find the pump label
Pump motors have a label with horsepower, voltage, speed (one- or two-speed) and frame size. Photograph it before ordering, because a replacement must match these and the plumbing size of the wet end.