Water Care & Chemistry
Hot tub water is a small volume of hot, heavily used water, so it goes out of balance quickly. Most water problems come from three things: not enough sanitizer, pH and alkalinity out of range, and old water that's loaded with body oils, lotions and dissolved solids.
Test two or three times a week with test strips or a kit, keep the sanitizer level up, and drain and refill every few months. That routine prevents nearly every problem in this section.
Water care guides
- Cloudy Hot Tub Water: Causes and FixesClear cloudy hot tub water by fixing sanitizer, pH and alkalinity, shocking, cleaning filters and knowing when it's time to drain.
- Foamy Hot Tub WaterWhy hot tub water foams and how to get rid of it: soaps, lotions, detergent in swimsuits, low calcium and old water.
- Green Hot Tub WaterFix green hot tub water from algae or metals: shocking, scrubbing, cleaning filters, and when to drain and refill.
- Hot Tub Water Smells BadWhat a chlorine smell, musty smell or rotten smell from hot tub water means, and how to fix it.
- Balancing Hot Tub pH and AlkalinityHow to raise or lower hot tub pH and total alkalinity, which to adjust first, and why pH keeps drifting.
- Chlorine vs Bromine for Hot TubsCompare chlorine and bromine sanitizers for hot tubs: stability in hot water, smell, cost, convenience and switching between them.
- How to Shock a Hot TubWhen and how to shock a hot tub with chlorine or non-chlorine shock, how much to use, and how long to wait before soaking.
- How to Drain and Refill a Hot TubStep-by-step: when to drain a hot tub, flushing the lines, cleaning the shell and filters, refilling without air locks and restarting.
- Hot Tub Line Flush and BiofilmWhat biofilm in hot tub plumbing is, signs you have it, and how to use a line flush before draining.
- Scale and Calcium Buildup in a Hot TubPrevent and remove scale in hot tubs: calcium hardness, high pH, scale inhibitors and protecting the heater.
- Hot Tub Test Strips vs Test KitsCompare test strips, liquid drop kits and digital testers for hot tubs, and how often to test.
- Saltwater Systems for Hot TubsHow saltwater chlorine generators work in hot tubs, pros and cons, compatibility and maintenance of the salt cell.
- Skin Rash or Irritation After Using a Hot TubWhy skin can itch or break out after a hot tub, how water care prevents it, and when to see a doctor.
- Hot Tub Chemicals: A Starter ListThe basic hot tub chemicals and supplies most owners need, what each does, and what you can skip.
- Brown or Yellow Hot Tub WaterWhy hot tub water turns brown, yellow or tea-colored: metals in fill water, pollen, organics and corroding parts, and how to clear it.
Typical target ranges
Common targets for hot tubs are pH 7.2 to 7.8, total alkalinity about 80 to 120 ppm, free chlorine about 3 to 5 ppm or bromine about 4 to 6 ppm, and calcium hardness about 150 to 250 ppm. Follow your tub manufacturer's and chemical maker's guidance where it differs.