Hot Tub Heater Problems
A typical home hot tub heats with an electric element inside a stainless steel tube, often 4 to 5.5 kW on 240-volt tubs and much less on 120-volt plug-and-play models. The control turns the heater on only when it's sure water is flowing through it, which is why so many heating problems are really flow problems.
Work through heating problems from the outside in: settings and modes, water flow, then the heater and its sensors, and finally the control board. Most of the early checks need no tools.
Heating guides
- Hot Tub Not Heating: Step-by-Step TroubleshootingWhy your hot tub isn't heating, from economy mode and dirty filters to flow problems, a burned-out element or a failed board.
- Hot Tub Heating SlowlySpeed up a slow-heating hot tub: cover condition, 120V vs 240V, heater size, cold weather, filters and scale on the element.
- How to Test a Hot Tub Heater ElementTest a hot tub heater element with a multimeter: what resistance to expect, how to check for a short to ground, and signs of failure.
- Replacing a Hot Tub HeaterWhat's involved in replacing a hot tub heater element or full heater assembly, how to choose the right part, and when to hire it out.
- Hot Tub Too Hot in SummerWhy hot tub water climbs above the set temperature in summer and how to keep it comfortable with filter settings, cover and shade.
- Hot Tub Loses Heat OvernightStop a hot tub losing heat: waterlogged covers, gaps, missing insulation, cold air pulled through jets and wind exposure.
- Heat Light On but Hot Tub Not HeatingIf the heater indicator is lit but the water stays cold, the element may be burned out or a relay isn't passing power. Here's how to narrow it down.
- Hot Tub Pressure Switch: Testing and AdjustmentHow the pressure switch on a hot tub heater works, symptoms of failure, and how adjustment and replacement are done.