Error codes, fixes and maintenance for home hot tubs

How to Clean a Hot Tub Filter

Filters & Circulation · Last reviewed 2026-11-21

Quick answer

Rinse filters with a garden hose every week or two, spraying between the pleats from top to bottom. Every month or so, soak them in a filter cleaner solution to remove oils and scale, then rinse thoroughly. Let them dry fully before reinstalling if you can. Don't use a pressure washer, dishwasher or household detergents, which damage pleats or cause foam.

Step-by-step

  1. Turn off the tub or put it in filter-change mode.
  2. Remove the filter lid and lift out the cartridge.
  3. Rinse with a hose, spraying into each pleat at an angle, from top to bottom.
  4. For a deep clean, soak in a bucket with a spa filter cleaner per its instructions, often overnight.
  5. Rinse thoroughly to remove all cleaner.
  6. Reinstall, or swap in a clean dry spare.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.

Common questions

Why are my filters always dirty so fast?

Heavy use, lotions and oils, low sanitizer or a missing skimmer basket. Showering before soaking helps a lot.