Error codes, fixes and maintenance for home hot tubs

Hot Tub Ozonator Not Working

Lights, Ozonators & Accessories · Last reviewed 2026-11-21

Quick answer

An ozonator injects ozone into the water to help sanitize, usually only during filter cycles. Many have an indicator light; you may also see fine bubbles at an injector jet. Common failures are a burned-out ozone generator, a clogged injector and a failed check valve that lets water reach the unit, which can trip the GFCI.

Most likely causes

  1. Only runs during filter cycles. Normal on many tubs.
  2. Failed ozone generator. Many have a limited service life.
  3. Clogged injector. No bubbles.
  4. Failed check valve. Water backs up into the unit.

Step-by-step troubleshooting

  1. Check whether a filter cycle is running.
  2. Look for the ozonator's indicator light.
  3. Check for fine bubbles at the injector jet.
  4. Replace the check valve and tubing if water is in the line.
  5. Replace the ozonator with a compatible model.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.