Error codes, fixes and maintenance for home hot tubs

Hot Tub LED Lights Not Working

Lights, Ozonators & Accessories · Last reviewed 2026-11-21

Quick answer

Check the panel light button and any light timer first. Then, with power off, check the light's plug at the control board. Many tubs have a single main light plus small point lights fed from a light controller. Water inside a light can kill the LEDs and trip the GFCI.

Most likely causes

  1. Panel setting or timer. Lights turn off automatically.
  2. Loose connector. At the board or controller.
  3. Failed LED bulb or board. Replace with the matching part.
  4. Water in the light. See Hot Tub Light Leaking: Resealing Spa Lights.

Step-by-step troubleshooting

  1. Press the light button and cycle through modes.
  2. Check light timer settings.
  3. With power off, reseat the light connectors.
  4. Replace the LED bulb or controller.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.