Error codes, fixes and maintenance for home hot tubs

Balancing Hot Tub pH and Alkalinity

Water Care & Chemistry · Last reviewed 2026-11-21

Quick answer

Adjust total alkalinity first, because it buffers pH. With alkalinity in range (often 80 to 120 ppm), adjust pH to about 7.2 to 7.8. Use pH increaser (soda ash) or decreaser (sodium bisulfate) in small doses, run the jets, wait, and retest. pH drifts up naturally with aeration from jets.

How to balance

  1. Test alkalinity and pH.
  2. Raise alkalinity with alkalinity increaser (sodium bicarbonate) if low.
  3. Lower alkalinity and pH with pH decreaser in small doses if high.
  4. Wait at least 30 minutes to an hour with jets running, then retest.
  5. Fine-tune pH.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.

Common questions

Why does pH keep rising?

Jets and air controls drive off carbon dioxide, which raises pH. Lower alkalinity slightly if it keeps drifting.