Error codes, fixes and maintenance for home hot tubs

How to Shock a Hot Tub

Water Care & Chemistry · Last reviewed 2026-11-21

Quick answer

Shock after heavy use, weekly with regular use, or when water looks dull or smells. With the cover open and jets running, add the dose on the product label, let it circulate, and wait the time the label specifies before soaking. Non-chlorine shock (MPS) usually allows a shorter wait than chlorine shock.

Step-by-step

  1. Test and adjust pH first.
  2. Open the cover and turn on the jets, with air controls closed if the product says so.
  3. Measure the dose for your tub's volume per the label.
  4. Dissolve if directed and add to the water.
  5. Leave the cover open for a while to let gases escape.
  6. Wait the time on the label before soaking.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.

Common questions

Chlorine or non-chlorine shock?

Non-chlorine (MPS) is good for routine weekly shocking; chlorine shock is stronger for problems.