Hot Tub Union Leaking
Quick answer
Unions are the large threaded nuts connecting pumps and heaters to the plumbing. Leaks usually mean the nut is loose, the O-ring or gasket is worn or missing, or the nut is cracked. Turn off power, close valves, unscrew the union, replace the O-ring, and tighten firmly by hand. Overtightening with tools cracks the plastic.
How to fix it
- Turn off power and close the valves on either side, or drain the tub below the fitting.
- Unscrew the union nut.
- Remove the old O-ring or gasket and clean the seat.
- Fit a new O-ring of the right size, lightly lubricated with silicone lubricant.
- Tighten by hand, plus a little with a strap wrench if needed.
- Open valves, restore power and check for leaks.
Parts for this repair
Always match the model and part number on your appliance's data plate or the old part before ordering.
Links go to eBay search results. We may earn a commission.