Hot Tub Leaking: How to Find the Leak
Quick answer
First confirm it's a leak and not evaporation. Then open the equipment bay and look for water at the pump unions, pump shaft seal, heater unions and drain valve, since most leaks are there. If the equipment is dry, let the level drop with the pumps off to see where it stops, then dye test fittings at that level.
Most likely causes
- Pump unions and O-rings. The most common leak point.
- Pump shaft seal. See Hot Tub Pump Leaking.
- Heater unions. See Hot Tub Heater Leaking.
- Drain valve. See Hot Tub Drain Valve Leaking.
- Lights. See Hot Tub Light Leaking: Resealing Spa Lights.
- Jets. See Hot Tub Jet Leaking.
- Cracked shell or fittings. Freeze damage. See Hot Tub Shell Cracked or Blistered.
Step-by-step troubleshooting
- Rule out evaporation. See How Much Water Loss Is Normal in a Hot Tub?.
- Turn off power, remove cabinet panels and look for wet spots, drips or white mineral trails.
- Hand-tighten unions and check their O-rings.
- Run the pumps with panels off and watch for drips.
- If dry, turn off the pumps and mark the level each day to see where it stops dropping.
- Squirt leak-finding dye near fittings at that level while the water is still and watch whether it's drawn in.
- Dig carefully into foam only where evidence points.
Parts for this repair
Always match the model and part number on your appliance's data plate or the old part before ordering.
Links go to eBay search results. We may earn a commission.
When to call a technician
Leak detection specialists and spa technicians can pressure test lines when the leak is buried in foam.