Starting Up a Hot Tub After Refilling
Quick answer
After filling above the skimmer, turn on power, run each pump to prime and bleed air, check for leaks, then balance alkalinity, pH and calcium before adding sanitizer. Let the tub heat with the cover on.
Checklist
- Fill through the filter housing with a pre-filter.
- Turn on power. Prime the pumps when Pr or a priming mode shows. See Hot Tub Pr Code: Priming Mode on Startup.
- Bleed any air locks. See How to Fix a Hot Tub Air Lock.
- Check the equipment bay for leaks.
- Balance water and add sanitizer.
- Set temperature and let it heat with the cover closed.
Parts for this repair
Always match the model and part number on your appliance's data plate or the old part before ordering.
Links go to eBay search results. We may earn a commission.