Error codes, fixes and maintenance for home hot tubs

Heat Light On but Hot Tub Not Heating

Hot Tub Heater Problems · Last reviewed 2026-11-21

Quick answer

A lit heat indicator means the control is calling for heat, not that heat is being made. If the water doesn't warm, the usual causes are a burned-out heater element, a failed heater relay on the board, or a loose or burned heater terminal. A multimeter test of the element is the first step.

Most likely causes

  1. Burned-out element. See How to Test a Hot Tub Heater Element.
  2. Failed relay. The board clicks but power doesn't reach the element.
  3. Burned terminals. Discolored or melted connections.

Step-by-step troubleshooting

  1. Confirm the water isn't warming over a few hours with the cover on.
  2. Turn off power and test the element.
  3. Inspect the heater terminals for discoloration.
  4. If the element tests good, have a technician check the relay and board under power.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.