Hot Tub Pressure Switch: Testing and Adjustment
Quick answer
The pressure switch screws into the heater or nearby plumbing and closes when the pump creates enough water pressure, telling the control it's safe to heat. A dirty, failed or poorly adjusted switch causes flow codes even when flow is fine, or, more dangerously, allows heating when there's no flow. Adjustment should be done carefully per the manual.
Most likely causes
- Debris in the switch port. Blocks the diaphragm.
- Failed switch. No continuity when pressurized.
- Out of adjustment. Reads wrong at normal pressure.
Step-by-step troubleshooting
- Rule out real flow problems first: filters, water level, air, valves.
- With power off, inspect the switch connections.
- Some switches have an adjustment screw; follow your manual's procedure exactly.
- Replace with the same part number.
Parts for this repair
Always match the model and part number on your appliance's data plate or the old part before ordering.
Links go to eBay search results. We may earn a commission.
When to call a technician
Adjusting pressure switches incorrectly can let the heater run dry. Many owners leave this to a technician.