Error codes, fixes and maintenance for home hot tubs

Hot Tub Air Blower Not Working

Pumps, Jets & Air Locks · Last reviewed 2026-11-21

Quick answer

An air blower pushes air through small holes in the tub floor or seats for bubbles. If it won't run, check the panel button and power. If it trips the GFCI, water may have backed up into the blower. A check valve between blower and plumbing helps prevent that. Blowers are usually replaced rather than repaired.

Most likely causes

  1. Water in the blower. Trips the GFCI.
  2. Failed motor. Silence.
  3. Missing check valve. Lets water reach the blower.

Step-by-step troubleshooting

  1. Press the blower button and listen.
  2. If the GFCI trips when it starts, unplug or disconnect the blower to confirm.
  3. Install a check valve if missing.
  4. Replace with a matching blower.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.