Error codes, fixes and maintenance for home hot tubs

Hot Tub Pump Won't Shut Off

Pumps, Jets & Air Locks · Last reviewed 2026-11-21

Quick answer

Pumps run often for good reasons: filter cycles, heating, freeze protection and circulation pumps that run most of the day. If a jet pump runs on high nonstop and won't turn off at the panel, a relay on the control board may be stuck closed, which needs a technician.

Most likely causes

  1. Normal cycles. Filtration, heating, purge cycles.
  2. Freeze protection. In cold weather.
  3. Stuck relay. Pump stays on no matter what.
  4. Panel fault. Button stuck.

Step-by-step troubleshooting

  1. Check the display for a filter, heat or freeze indicator.
  2. Review filter cycle settings.
  3. If it won't stop and no cycle is shown, turn it off at the breaker and call a technician.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.