Error codes, fixes and maintenance for home hot tubs

Hot Tub ICE, IC or FrE Freeze Warning

Hot Tub Error Codes · Last reviewed 2026-11-21

Quick answer

Freeze codes like ICE, IC or FrE usually mean the control detected a risk of freezing and is running the pumps to keep water moving. That's normal in cold weather. It becomes a problem if the power is off, a pump has failed or the code shows when it isn't cold, which points to a sensor fault.

Most likely causes

  1. Cold weather. Normal freeze protection.
  2. Low water temperature after a power outage. See Hot Tub Power Outage in Freezing Weather.
  3. Faulty sensor. Shows a freeze warning in warm weather.

Step-by-step troubleshooting

  1. In cold weather, leave the tub on and covered so freeze protection can work.
  2. Make sure the pumps start when the code appears.
  3. Keep the cover closed and secure.
  4. If the code appears in warm weather, have the sensors checked.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.

Common questions

Should I turn the tub off in winter to save power?

Not unless you fully winterize it. A filled tub with the power off can freeze and crack pipes and equipment. See How to Winterize a Hot Tub.