Error codes, fixes and maintenance for home hot tubs

Hot Tub HL, HFL and LF Errors

Hot Tub Error Codes · Last reviewed 2026-11-21

Quick answer

On Gecko systems, HL usually means the heater's high-limit protection tripped because the heater got too hot. On Balboa systems, HFL usually means the two heater sensors disagree, a sign of poor flow, and LF can follow if it keeps happening. Both usually come back to flow: filters, water level, air locks and valves.

Most likely causes

  1. Poor flow. Dirty filters, low water, an air lock or a closed valve.
  2. Weak circulation pump. On tubs that heat with a circulation pump, a failing pump starves the heater.
  3. Scale in the heater. Hard water deposits insulate the element and sensors.
  4. Failed sensor. One sensor reads wrong.

Step-by-step troubleshooting

  1. Clean the filters and top up the water.
  2. Bleed air from the pump and heater. See How to Fix a Hot Tub Air Lock.
  3. Check that all valves are open.
  4. Reset the code per the manual.
  5. If it returns quickly, have the sensors and circulation pump checked.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.

Common questions

Does HL mean my heater is broken?

Not necessarily. Most HL trips come from flow problems. If the code clears after you fix flow and reset, the heater is likely fine.