Error codes, fixes and maintenance for home hot tubs

Which Hot Tub Control System Do I Have?

Hot Tub Error Codes · Last reviewed 2026-11-21

Quick answer

Open the equipment bay (with power off) and look at the control box, the gray or black box where wires from the pumps and heater meet. The manufacturer's name and model are usually on a label on the box or its cover. The topside panel may also show the name. Write down the model and part numbers before searching for codes or parts.

How to find it

  1. Turn off power at the breaker.
  2. Remove the cabinet panel to reach the equipment bay.
  3. Find the control box and read its label. Photograph it.
  4. Look at the topside panel and the heater for brand names and part numbers.
  5. Look for the tub's own model and serial label, often inside the equipment bay.
BrandWhere you'll often see itNotes
BalboaLabel on the control box; many topside panelsVery common across many tub brands
GeckoLabel on the control box (in.xe, in.ye, in.k panels)Common across many brands
Hydro-QuipLabel on the control boxOften on older or value tubs
ProprietaryJacuzzi, Hot Spring, Sundance and othersUse the tub brand's manuals and dealers

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.