Error codes, fixes and maintenance for home hot tubs

Hot Tub Temperature Reading Wrong

Hot Tub Error Codes · Last reviewed 2026-11-21

Quick answer

Many tubs only update the displayed temperature after the pump has run for a minute or two, because the sensor sits in the plumbing. A difference of a degree or two is normal. If the display is consistently far off from an accurate thermometer, the temperature sensor may be failing.

Most likely causes

  1. Pump not running. Display shows stale readings.
  2. Sensor location. Water in the plumbing differs from the tub.
  3. Failing sensor. Large or erratic differences.

Step-by-step troubleshooting

  1. Run the pump for a few minutes, then compare the display with a good thermometer in the tub.
  2. Repeat at different times of day.
  3. If the difference is large and consistent, replace the sensor for your control.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.

Common questions

Should I trust the display or a thermometer?

A good floating thermometer, after the pump has run, is a reliable check.