Error codes, fixes and maintenance for home hot tubs

Hot Tub Sensor Errors: Sn, SnA, SnB, SnS and Prr

Hot Tub Error Codes · Last reviewed 2026-11-21

Quick answer

Sensor codes mean the control is getting no reading, or an impossible reading, from a temperature sensor. On Balboa systems they often appear as Sn, SnA, SnB or SnS; on Gecko systems as Prr (regulation probe). Check that the sensor plug is firmly seated in the control board, look for damaged wires, and replace the sensor if needed.

Most likely causes

  1. Loose sensor plug. Vibration can loosen connections.
  2. Damaged sensor cable. Rodents and heat damage.
  3. Failed sensor. Common with age.
  4. Board fault. Less common.

Step-by-step troubleshooting

  1. Turn off power at the breaker.
  2. Open the control box and check that sensor plugs are firmly seated.
  3. Inspect sensor cables for damage.
  4. Restore power. If the code returns, replace the sensor with the part made for your control.

Parts for this repair

Always match the model and part number on your appliance's data plate or the old part before ordering.

Links go to eBay search results. We may earn a commission.

When to call a technician

Opening the control box exposes 240-volt connections. If you're not comfortable, have a technician check the sensors.